For this method, all you need is super glue and a match. Ordinary glue won’t work as you’d be required to pull the broken key out using just the glue. Next, shove it into an open spot in the keyway with the barb facing perpendicular (90 degrees) to the key and then rotate the hook towards the key.

To use superglue, place a VERY small amount of glue on the broken section of the key. Smear the glue around and wipe away any excess globs so nothing smushes out.If you have a broken key extractor kit then now is the time to use it. There is usually an assortment of long thin tools in this kit to use to slide down the side of the key to help to pull it out. Don’t push it too far, just enough that the pressure is applied firmly, and pulling the key out becomes easy. The first method is to slip your paperclip under the bottom of the broken piece and then push it downwards to leverage it into the key. All metallic objects can be magnetized. When a magnet is brought closer to a metal object, it takes on the magnetic field and the object becomes attracted to it. ( 2)

There are many different types of key extractors, but each is typically used the same way. They dig something sharp into the broken piece of the key and give you the leverage to pull it out. Make sure that you have lined up the nozzle of the lubricant so that it is inside the keyway before you spray. You will also need a rag or paper towel to remove any of the excess lube that spills out of the keyway. Also, grab a pair of needle-nose pliers, because even though these methods will remove the broken key, pliers will help to get it out that much faster. Once enough of the key is accessible, you can just pull it free with your pliers. Materials That May Come In Handy Broken key extractors come in different designs. Some have one hook while others have more, so you'll have to decide the most effective one to use for your situation. You should give it several tries since it might not work perfectly the first time. 4. Needle Nose Pliers Push it in as far as possible and then bend the tool into the key so that the threads dig into the key. Select an extractor in your set once you have a good gauge of where the missing piece is lodged. Generally, the small hook type is the most common tool to use to search for nudges to hook a missing piece out.If you provide content to customers through CloudFront, you can find steps to troubleshoot and help prevent this error by reviewing the CloudFront documentation. Yanking on a snagged key could result in further damage or broken pieces. If the key is jammed up, you can attempt to free it by gently wiggling it or turning it in both directions. NOTE: These numbers provide an average but you might have to wait longer. We think it's only fair that we warn you of this. Here is the breakdown of the inventory you’d need for all the ways mentioned in the article to work. To start, take your knife and poke it into the side of the key—like in the image above. Apply some force to stab the key as much as possible, and be very careful not to slip and annihilate yourself.