Anything smaller than about 2/10 of an inch (about the size of a pencil) doesn’t need to be repaired. By following weight capacity limits and not exceeding the recommended usage, users prevent unnecessary strain on the trampoline frame, springs, and mat, reducing the risk of damage or collapse. Adjust spring tension: If the mat is consistently loose, you may need to adjust the tension of the springs. If you continue jumping on a trampoline mat with even a small hole in the middle, chances are that the hole will widen in a jiffy, and you will fall through.

If you allow jumping over a hole mat, it will develop over time which will lead to replacing the mat completely which is a massive loss of money. By following these tips for correct installation, ensuring secure attachment, and maintaining the trampoline mat, you can promote its longevity, performance, and safety.

You will need a sewing machine with a powerful motor; a sewing machine needle made for denim, vinyl, and leather; and upholstery-strength thread (make sure it is UV-resistant or you will regret it). Elasticity loss: With frequent use, the trampoline mat may lose its elasticity, resulting in reduced bounce performance.

PTFE/FLUOROPOLYMER- if you want something to last forever, this is the closest thread to that objective.However, if your trampoline mat has a minor or much smaller tear, then you can use duct tape to cover the ripped portion of the mat.

And it will eventually get bigger into a big and then a huge one where there will be an actual safety concern.

However, that being said, there are actually some ways you can mend your trampoline mat by yourself, which are both easy and on the more pocket-friendly side. Allow for curing time: Depending on the adhesive or glue used, allow sufficient time for it to cure and bond effectively.

Whether it’s at home or in a public setting, implementing and enforcing safety guidelines demonstrates a commitment to user safety and may reduce the risk of legal complications. The content created by our editorial team is therefore objective, factual and not influenced by our advertisers.Finally, the company, Bear Claw, recommends sewing around the patch with either a cross-stitch or a whip stitch (see pictures below). If you have some basic sewing skills, you can repair a hole in your trampoline mat by sewing it closed. Remove the old mat and springs: Carefully remove the old trampoline mat by detaching the springs from the frame. Over the years, Robert has honed his skills and knowledge in the field, and now uses his expertise to train others. Make sure the patch covers the entire hole and the edges are properly aligned with the trampoline fabric.