Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functions

Hush, silence the alarm: Will silence nuisance alarms for approximately 10 minutes before automatically resetting Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm. It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system: The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms. The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutesThis model of Control Switch is hard wired into the system, but there are wireless versions available. Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied) The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms. Locate, identify a triggered alarm: The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes

Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive). If you have a fire alarm system comprised of three or more interconnected smoke/heat alarms, it can be useful to keep a remote test and hush switch to hand. The Aico Ei1529RC is designed specifically for use with the Aico Ei160 series of smoke and heat alarms: the Ei161RC ionisation detector, Ei164RC heat detector and the Ei166RC optical detector. If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return Here Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger.Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied). Test Pressing the Test switch into the on position will test all the alarms in the system. This operation is equivalent to pressing the Test button on all alarms in the system simultaneously and as such performs a true functional test of the system without having to reach up to each alarm in turn. Pressing the Test switch overrides the Location function and resets the system to standby. Add to quote” – this option allows to you gather items together and ask us for a no obligation quote. We’ll do our best to improve our already competitive prices where possible.