Sony MDR1AM2 Wired High Resolution Audio Overhead Headphones, Black (MDR-1AM2/B)

Product Information

Para mí, se sienten con cuerpo, ligeramente robustos, muy bien definidos. Este tipo de sonido me parece que es el que más valoro, la fidelidad en estos medios es muy buena.

Ears also tend to get hot after listening to it for prolonged periods of time. For the MSRP they ask on it, I really expected a lot more have to be honest. The MDR-1AM2’s predecessors were renown for being extremely comfortable and I’m happy to report that the MDR-1AM2 is the same. To begin, the MDR-1AM2 is extremely light, weighing just 187g. The headband is lined with soft synthetic leather and distributes what little weight of the headphone nicely. The impulse response is displayed as is, without compensation of the frequency response for the microphone or smoothing. It is RAW data. The reduction in the frequency response of the microphone starts at 20 kHz . First off, just note that do this at your own risk. If you've modded before, this is a pretty simple mod and requires no soldering. Just don't accidentally poke the drivers nor pull the internal wiring too much. According to this graph, you can estimate at what volume the headphones will be perceived more flat.Por otra parte, en comparación con los Sony wh1000xm3, estos suenan con más graves y les falta claridad en los agudos; obviamente la ventaja de los wh1000xm3 es que son Bluetooth, soporta muchos codec de audio digital y tienen cancelación de ruido, lo que los hace bastante prácticos. The over-the-ear design is too tight for my liking. With my Sennheisers (598 SE), I could forget I was wearing them. I can't with the MDR1AM2s. I find myself frequently adjusting the left can for proper fit. Nipponjin must have small ears compared to Germans. I demo'd a pair today and the modder in me thought "POTENTIAL" so I went ahead and bought a pair. Also, it doesn't squeak and creak like the few MDR-1A's I've demo'd in the past!

Dentro de los aspectos positivos, se encuentra su ligereza y comodidad, los puedes usar durante mucho tiempo, sin que sientas molestia alguna; también el hecho de que suenan excelentes tanto con archivos de alta calidad, como con archivos de mediana calidad, lo que los hace bastante versátiles, y que no necesitas amplificador para usarlos, ya que cualquier reproductor de audio portátil o equipo celular tiene la potencia suficiente para alimentarlos.

Recently Viewed

In the low end, the 1AM2 exhibits a lively, driving bass – not heavy-handed, but energetic. At times, the bass seems to overshadow low-end detail just a smidgen, but rest assured there is still ample detail at play here. At the end of the day, the lows remain clean and articulate, providing you with a sweet bottom end. Mids I wish at least the headband was made from velour or alcantara so it lasts longer and doesn't require regular cleaning. The impulse response is able to show visually only the same or different polarity of the drivers and possible high-frequency resonance. I bought the MDR-1AM2 in 2022 at sale for a price of 100 euros (the MSRP is more than 200), main reason being I wanted to have a pair of very light headphones.

The frequency response in RAA is obtained through the reproduction and analysis of a special noise signal with the subsequent generation of an impulse response. The frequency response in RAA is obtained through the reproduction and analysis of a special noise signal with the subsequent generation of an impulse response. The frequency response plot is constructed from the spectrum of the impulse response.During the measurements, a special amplifier was used with zero total output impedance over the entire frequency range, which required /amp_comp.php>no compensation for the amplitude response F.A.Q.. The microphone is calibrated to 45 kHz F.A.Q. with an appropriate frequency response correction. Under the hood, the Audio Technica ATH-MSR7B utilizes a larger 45 mm driver. In contrast, the MDR-1AM2 sports a smaller driver measuring 40 mm. Both being relatively easy to drive, neither one requires amplification, though the MSR7B would benefit slightly more from some amplification.

Specifications

Compared to the previous version the bass has been tamed significantly, but it's still way above what it should be. The frame is light but the build quality remains sturdy without feeling cheap. It should be noted that the pressure-relieving earpads, while comfortable, may trap heat when wearing the headphones for about an hour or so. The earpads tend to flatten over a listening session; my ears gradually begin to touch the grills in front of the drivers when wearing these for more than 2 hours. I have to take these off for about 20min to let the earpads return to its original shape.