About this deal
No 802.1X (Not a huge deal because I can enable multi-host on the upstream switch, which limits the danger-zone to just the other client ports on the switch.)
Please Note: This product does not come with PoE injectors included, however, you can select our PoE injector kits from the accessories menu. Ubiquiti UniFi USW Flex Mini 5-Port Layer 2 Gigabit Switch - EU Power Supply (USW-Flex-Mini) There’s a lot to cover when it comes to PoE, so I’ll try to keep it as simple as possible. There are 4 main types of PoE to know about: Ubiquiti calls them “Gen2” but I am going to call them 2nd generation. Whatever you call them, Ubiquiti’s newer UniFi switches split things into a few tiers. There are models which replace the 1st generation switches, and the higher pro and enterprise tiers.
The USW-EnterpriseXG-24 is a 2nd gen model, with twenty-four 1/2.5/5/10 Gbps RJ45 and two 25 Gbps SFP28 interfaces. No PoE.
EdgeSwitches are more flexible and capable, and are a better fit for network operators, WISPs, managed service providers, and other more advanced networks. If you need features like link aggregation, TACACS+, RADIUS, 802.1X, MAC filtering, ACLs, or static routing, you’re better off with an EdgeSwitch than a UniFi switch. UniFi switches support many of these features, but are often less configurable, poorly documented, and less reliable. The UniFi Switch Flex Mini uses only a maximum of 2.5W. For your convenience, it can be powered by 802.3af/at PoE or a 5V,1A USB-C power adapter(european only)Do not have a serial console port. All management has to be done over Ethernet in-band. (EdgeSwitches still have console ports!) The UniFi USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports, providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the included USB Type-C (european only) power adapter or with 802.3af PoE Ethernet in port 1. EdgeSwitches have an optional web interface overlay called UISP, which is similar to the UniFi controller. UISP is limited when it comes to EdgeSwitch configuration, and it doesn’t have every option that the device’s individual web GUI or CLI has. Think of UISP as an easy way to monitor all of your AirMAX, LTU and EdgeMAX devices, rather than a single interface for configuring everything like the UniFi controller. No LACP (This would be a niche use case for a 5-port switch, but one scenario that sometimes comes up is having an Ethernet repeater for >100m runs, and it would be nice to have link-level redundancy and 2Gbps throughput for that repeater.)